Victron Ultimate 4×4 Canopy Bundle, 3 Year Warranty.
Bundle Includes:
- Victron Smart LiFePO4 Lithium Battery 12.8V/200Ah-a, BAT512120610
- Victron MultiPlus 12/2000/80-32 Inverter/Charger, PMP122200000
- Victron Orion-Tr Smart 12/12-30A (360W) Non-isolated DC-DC charger, ORI121236140
- Victron VE.Bus BMS, BMS300200000
- Victron Smart Battery Protect 12/24V-65A, BPR065022000
- Victron Battery Monitor BMV-712 Smart, BAM030712000R
- Victron Battery Switch ON/OFF 275A, VBS127010010
- 2 x Victron Busbar 150A 6P + Cover, VBB115060020
- Victron RJ45 UTP Cable 0.9 m, ASS030064920
- Victron Interface MK3-USB – VE.Bus to USB, ASS030140000
- Victron M8 Circular Connector Cable Male to Female 3 Pole 1 Metres, 2 Pack, ASS030560100
Victron Smart LiFePO4 Lithium Battery 12.8V/200Ah-a
- With integrated cell balancing
- Can be parallel and series connected
- Bluetooth app available to monitor cell voltage and temperature
Why lithium-iron-phosphate?: Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.
Bluetooth: With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance
Victron LFP batteries have integrated cell balancing and cell monitoring. Up to 5 batteries can be paralleled and up to four batteries can be series connected,so that a 48V battery bank of up to 1500Ah can be assembled. The cell balancing/monitoring cables can be daisychained and must be connected to a Battery Management System (BMS).
Battery Management System (BMS): The BMS will:
- Generate a pre-alarm whenever the voltage of a battery cell decreases to less than 3,1V (adjustable 2,85 – 3,15 V).
- Disconnect or shut down the load whenever the voltage of a battery cell decreases to less than 2,8V (adjustable 2,6 V – 2,8 V).
- Stop the charging process whenever the voltage of a battery cell increases to more than 3,75 V or the temperature increases to more than 60°C
Victron MultiPlus 12/2000/80-32 Inverter/Charger
Multifunctional: The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Unique PowerAssist feature: The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
Uninterrupted AC power (UPS function): In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
Virtually unlimited power thanks to parallel operation: Up to 6 units can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.
Remote Monitoring and Control: When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your MultiPlus and system or systems locally (via LAN) or remotely (via the internet) from anywhere in the world, using the free VRM app and the free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your MultiPlus to auto starting a backup generator and more…”
Victron Orion-Tr Smart 12/12-30A (360W) Non-isolated DC-DC charger
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead-acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Bluetooth Smart enabled: Any Bluetooth enabled smartphone, tablet or other devices can be used to monitor, to change settings, and to update the charger when new software features become available.
Victron DC-DC Chargers: Non-Isolated vs Isolated: The main difference with an isolated DC-DC charger is the connection to each battery as there is only one negative connection to the battery. Plus, there is no internal connection between the negatives in the battery. Some systems require an isolated DC to DC charger, this can be some of the reasons:
- Typically, marine application with limited corrosion
- Decrease noise from one battery system that will affect another battery system
Either unit can be used for systems that don’t require isolation, but the non-isolated requires one less wire to be installed. One example of a non-isolated system is an automotive system, such as both batteries are negative and connected to the chassis of a vehicle. The system is non-isolated but either unit will suit.
No Solar Regulator in the DC-DC Charger: Victron have chosen to separate the charger and the solar regulators, these are the advantages:
- You can choose the correct solar regulator to match your panels with the best efficiency for the solar charging
- The solar can be charging into the battery system simultaneously with the onboard vehicle charging
- Without a solar regulator, the DC-DC charger will stay cheaper
Input fuse (not replaceable)
Victron VE.Bus BMS
The VE.Bus BMS protects each individual cell of a Victron lithium-iron-phosphate (LiFePO4 or LFP) battery. Each individual cell of a LiFePO4 battery must be protected against over-voltage, under-voltage and over-temperature. Victron LiFePO4 batteries have integrated Balancing, Temperature and Voltage control (acronym: BTV) and connect to the VE.Bus BMS with two M8 circular connector cord sets. The BTVs of several batteries can be daisy-chained. Please see our LiFePO4 battery documentation for details.
The BMS will:
- Shut down or disconnect loads in case of an imminent cell under voltage.
- Reduce charge current in case of imminent cell overvoltage or over temperature.
- Shut down or disconnect battery chargers in case of imminent cell overvoltage or over temperature.
Victron Smart Battery Protect 12/24V-65A
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).
If required, Bluetooth can be disabled.
The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.
Victron Battery Monitor BMV-712 Smart
With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.
Victron Battery Switch ON/OFF 275A
Battery Switch ON/OFF 275A
2 x Victron Busbar 150A 6P + Cover
Busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.
Victron RJ45 UTP Cable 0.9m
A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
Victron Interface MK3-USB – VE.Bus to USB
The MK3-USB allows the products to connect to a computer for configuration and firmware updates.
Compatable with:
- Multi
- MultiGrid
- MultiPlus
- MultiPlus-II
- Quattro
- Inverter/Charger settings in ECOmulti
- EasySolar
- EasyPlus
- Inverters with a VE.Bus communication port.
Victron M8 Circular Connector Cable Male to Female 3 Pole 1 Metres, 2 Pack
The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model.
Reviews
There are no reviews yet.